Orings

[gtfireftr]

Hey all....
I am looking for 2 orings to be able to finish my assembly of my 787 RFI
I need the mag cover o-ring, as well as the water channel o-ring...
Any advice as to where to source these would be greatly appreciated....

Thanks

 

[Minnetonka4me]

Water channel...the thing on the front of the mag housing? LOL no the bottom of the motor...

If you have old ones reuse them. I just coat them with RTV to make a better seal.

 

[gtfireftr]

unfortunately I cannot find them...... I may have sent them out on the motor???

Does anyone have a source for them?

Thanks

 

[racerxxx]

Hit your local dealer, if they don't have it they should be able to get it in a few days. I know I can get my stuff in less than a week if they don't have it.

 

[gtfireftr]

Just checked with Seadoo..... how can both O-rings be the same part number......
Do I shape them into the form needed, or is there an error on the diagrams????
Thanks

 

[racerxxx]

You tuck it in the groove.

Sent from my SGH-T889 using Tapatalk 2

 

[griz400]

go to a transmission shop and they can match something up, and seal also with some rtv sealer as nick suggested

 

[jhjesse]

http://fiche.seadoowarehouse.com/se...adoopwc&a=239&b=7&c=0&d=-MAGNETO-AND-OIL-PUMP

#16 and #19

Hope this helps

 

[gtfireftr]

Thanks for the replies....