Ordering parts in Canada?

[Dylan Mackay]

Hey guys. I’m having a time here finding the right site I can order parts that is as good as osd … they seem to have it all. Only thing is that it’s $90 shipping to where I am in Manitoba. I’ll do it if i have to but it’s not great when i only need a couple parts .. winter circle seems to be alright but doesn’t have nearly as much.

Just wanted to see if there is a place/ site I don’t know about yet that us in Canada can order from. Thanks guys

 

[burtshaver2021]

What machine and what parts?

 

[Dylan Mackay]

96 gts . I need new cooling hoses and the oem ones are 12.5mm. Also small things like oil filter , and the T fitting flush port as mine seems to just pop off (plastic white piece) when I’m riding and fills the hull with water. Amazon sells the oil filter but seems cheap from reviews. I also like how osd has a “back to oem” carb kits. Starter rebuild kits as well. I had a bunch of stuff in my cart at the osd website and saw the shipping cost and hesitated a tad .. lol

 

[burtshaver2021]

96 gts . I need new cooling hoses and the oem ones are 12.5mm. Also small things like oil filter , and the T fitting flush port as mine seems to just pop off (plastic white piece) when I’m riding and fills the hull with water. Amazon sells the oil filter but seems cheap from reviews. I also like how osd has a “back to oem” carb kits. Starter rebuild kits as well. I had a bunch of stuff in my cart at the osd website and saw the shipping cost and hesitated a tad .. lol

are you close to the border? I use a parcel service in the states, go over and pick up my packages. The thing with having it shipped to Canada is there willl most likely be duty and brokerage fees as well. Don’t use the oil filters off Amazon, if you do, make sure they don’t have a paper filter in them. The ones from OSD are like OEM and just have a fine wire mesh screen in them. Fellow on here did a test and the cheap ones didn’t allow as much oil through

 

[burtshaver2021]

The cooling lines should be available from an auto parts store or agricultural store I would think. Could you not do away with the T fitting ? If you want to flush just take the cooling hose off and make yourself something? I just cut the femaleend off a garden hose, put the cut end onto the cylinder cover and screw the garden hose I have to it. I have a spare oil filter from OSD I could sell you for cost plus shipping if it helps?