• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

New to PWC

Status
Not open for further replies.

Phillipspool

New Member
just want to say hello and warn you guys I will be asking tons of questions. I picked up a 95 and 96 XP for a steal with the trailer. I was able to get the 96 to fire and run but not the 95. On the 96 there is a negative wire to the ignition and everything powered up and started. The 95 I can not see that wire. It will turn over and has spark at the plug but the gauges do not light up. What am I missing.
 
Welcome aboard and thanks for joining. Post in the 2-stroke section since you have questions. This is the Meet and Greet, fewer will see your question here.


Sent from my iPhone using Tapatalk
 
Three big hints:
get a service manual, they are very good and can be found either here or on-line
peruse and search the 2-stroke section for good info
clean up the fuel system is the biggest hint for these older SeaDoos

welcome and have fun learning
 
Status
Not open for further replies.
Back
Top