New Hardware update kits for carbs

[manolocross]

A bunch of you guys have received these kits, how have they worked out for you?

Worked out awesome on my 787 carbs!!! Ski runs like a dream!!!!thanks!!!

 

[KayakNFly]

I installed these about a month and a half ago. They worked great! Just now getting pics up.
Getting the old screws out was a major pain.


The heads stripped. Was able to get most out with a hand impact screwdriver. But this one was the hardest. Had to take a torch to it and turn it in 1/8 increments with lots of pb blaster.


After all that I forgot to take pics of the new ones installed. They worked great and I recommend them!
Thanks JSG.

 

[Mtnbiker99999]

Do you still have packs of screws for carbs?

I have a spx 717 an sp 587.

Thanks.

Dan

 

[manolocross]

Hey goodies you still got these kits??? I have been pm'ing but no answer. I need a set!!! Bumpo


Sent from my iPhone using Tapatalk

 

[manolocross]

Thanks guys! I got in touch with him... Soooo if you need some maybe now is the time to message him. These screw kits are AWESOME!


Sent from my iPhone using Tapatalk

 

[thomps33]

JSG, are you still selling these? I'd be interested in 3 kits for the 787 dual carbs with fuel pump.

 

[Jetskigoodies]

Yes still have them. I will pm you later tonight. I am at work until 11pm

 

[Rosie2514]

need a set for my 787. PM me your paypal.

 

[Jetskigoodies]

Sorry I will get with you guys in the am. I just got home from a late night.

 

[thomps33]

No worries. Not in a big hurry. Water will be hard for a while longer!

 

[RodInEscondido]

As mentioned on other threads here the phillips-type screws are actually JIS as indicated by the little indented dot on the head. Acquiring the proper drivers (available at many sites, I got mine on Amazon) will make working with these screws much easier, even if the goal is to remove and replace with something else. Since using the proper driver I have not stripped out the head of any JIS screw (now I went and said it). A cheap substitute sometimes works by grinding off the tip of a phillips screwdriver of appropriate size so the driver does not bottom out in the screw head.

 

[northshorerider]

Love this idea! I did this to my carbs about 2 years ago while I was working for a bolt supply house. I also replaced the little screws that hold the seat and needle arm with socket screws. No more beating your head against a wall over the little demon screws. I swear if you look at them the wrong way they strip.

 

[bigtexan99]

Goodies, do you still have the screw kits for the 951 carbs? Anyone know who else has them?

 

[SabrToothSqrl]

When someone said Screw Kit, I had something else in mind. :cheers:

 

[chamilton89]

Do the 587 and the 657 use the same 38 carb? Looking for a set for my dual carb 587 setup!


Sent from my iPhone using Tapatalk

 

[bigtexan99]

Hamilton I never heard back from Goodies but found these on ebay.

http://www.ebay.com/itm/171980520849

 

[chamilton89]

Hamilton I never heard back from Goodies but found these on ebay.

http://www.ebay.com/itm/171980520849

That's perfect. Exactly what I was looking for. Thanks for doing the leg work on that one.


Sent from my iPhone using Tapatalk