My 04 3D is running the bilge pump every 10 seconds anytime there is battery power (with lanyard on or off). So, eventually there is no power 
Cleaned up corrosion on the VCM module plug and it cleared for a bit , but now back to the same old trick.
So... A: I am looking for a VCM for an 04 3D.
B: I have different info from diff Doo manuals calling the module on the rt side of the ski a VCM , and the OTAS (schematics say vcm , parts manual says OTS). Are they both indeed run by the same module or any other experience with these I should know of?
Thanks
EDIT: further reading tells me YES , VCM and OTAS are in the same module. I chose to leave the Q/A in post so thers may learn from it.
Cleaned up corrosion on the VCM module plug and it cleared for a bit , but now back to the same old trick.
So... A: I am looking for a VCM for an 04 3D.
B: I have different info from diff Doo manuals calling the module on the rt side of the ski a VCM , and the OTAS (schematics say vcm , parts manual says OTS). Are they both indeed run by the same module or any other experience with these I should know of?
Thanks
EDIT: further reading tells me YES , VCM and OTAS are in the same module. I chose to leave the Q/A in post so thers may learn from it.
Last edited by a moderator:
