flyingarmy
New Member
Added these last night. I didn't have room on the dash for the Volt Guage and since I am installing a 2 battery Perko switch it only makes sense to have the gauge where you can see it as you switch from 1-2-Both. The charging/accessory plug was from my motorcycle. It did the same thing on the bike as it will for the boat. Trickle charger will attach when in the garage and I can use it to hook up my blower to inflate the tubes. The volt guage will have a single wire to the hot end on the perko switch. It will tell me the volts on whichever battery I have selected. The charging/accessory plug is wired directly to the battery. Once I install the second battery Ill have to add another charger or an isolator. I'll probalby go with the isolater. The big hole in front of the gauge and plug is the starboard exhaust vent removed.
