Just wanted to say hi

[Pitbullracing]

Hi my name is Brian I just foot a 1995 seadoo speedster but having problems already if anyone can help it would be great one motor runs out good the other at 4500 rpms it's like a slipping clutch or a slipping tranny feeling it revs out but nothing happens

 

[Seadoobuddy]

Welcome to the forum.
I can't help you with boats but some one will chime in soon.

What is "foot" a 1995........

 

[El Toro 33809]

Just like a PWC, the Speedster can cavitate. Check the wear ring, impeller, etc.......

 

[Pitbullracing]

Yeah I checked the wear ring it had chunks missing do you think that's the problem and is it best to get it from seadoo or where

 

[El Toro 33809]

Brian, yes that definitely would be the problem. It is a fairly easy fix for you to do yourself. Just depends on how fast you want it and if there is a dealer near you. In addition there are lots of places online where you can order them. When you have it apart it will be good to change the gear oil too.

 

[Gamerse]

Welcome to the forum. There are a bunch of guys with your boat in the sport boat section.

 

[Seadoobuddy]

PittBR, the wear ring is your problem. Since one engine was running good it wasn't as noticeable as in a ski w/ only 1 engine and pump.
On the home page scroll down to the "how to" section, there a very good thread on how to change the wear ring, pump oil too.

How are both of your impellers?

 

[100guard]

Welcome.,

I am just saying Hi back...but clueless about these mechanical things., so don't take my not chiming in as a snub. LOL.,

 

[Pitbullracing]

Thanks everybody for the input. The impellers look good so trying to get new wear ring today hope that fixes it

 

[Sink]

I see you have already checked it out and found your problem. Sea Doo parts seem to be the way to go on this. SBT also sells wear rings but from what I've heard they dont have the lip on them which makes it harder to position it. Easy do it yourself project. Good luck and let us know how it turns out.