Jet Pump Leaking from Screw

[daniel12]

I just noticed that the jet pumps on both my GTX DI and RX DI are leaking from the same spot where the filler hole is. I know the best thing to do it replace the oil, o-rings and pressure check but would it be safe to ride how it is until my pressure tester arrives?

Side note, would i be able to buy the jet pump Orings at a local store? What size are they?
Also, what pressure tester do you guys use? Link?

 

[mikidymac]

Honestly, I would just tighten them up a little, you could add a little thread sealant if you want.. They are pipe threads so technically they don't need andy sealant. The pressure tested won't do anything for that leak because that is where the tester threads into.

As far as I know the o-rings are not a hardware store size.

 

[JJinSC]

If it is leaking only at the filler hole I would pull the cone off, change the oil and put pipe thread sealant (non-hardening) on the threads of the filler hole plug. Of course, by changing the oil, I mean inspecting, cleaning replacing any other parts that need to be.