Interchange hoods?

[KKing]

On my 94 GTX, the mirrors that came on it were all busted and sagging, so I took the off completely and made some plates to block the holes out of abs. Now my problem is I actually want mirrors, for towing legally and I'm not too keen on drilling more holes to mount mirrors like on my 95 gtx that has 4 mounting bolts versus my 2. So I was wondering if any of the hoods off the slightly newer skis with the mirrors attached would fit on mine so I could just change hoods? Do the xp style skis of that year have the same nose dimensions? I know theyre a different animal but don't know that aspect. I've never been close to one in person so I'm not sure, I would just love to be able to change hoods instead of drilling holes in the hull?
Edit...It looks like a 96 or 97 hood might fit?

 

[Dr Honda]

Unfortunately... the "GT" hods were different than the 2 seat hoods. And, since you are dealing with an early square nose hood... finding a good set of mirrors isn't going to be easy.

Personally... I'd just get a set of generic PWC mirrors, and bolt them on. You can always make a bigger filler plate to make it look clean.

 

[ocod]

http://www.seadoosource.com/seadoomodelreference.html

Helps as reference.
Do you have picture of plate you made.
I had to remove mirror and thinking on how to cover the four holes?

 

[KKing]

http://www.seadoosource.com/seadoomodelreference.html

Helps as reference.
Do you have picture of plate you made.
I had to remove mirror and thinking on how to cover the four holes?

Yeah looking at everything I'm either gonna have to mount some mirrors on the hood or drill holes. I don't have a picture but I'll try to get one. I got my abs from tap plastics .com