Info Center Digital Gauge not working

[JMarciniak]

The digital gauge on my rxdi doesn’t work, no gas gauge level indication or info at all, screen is blank. But the speedo gauge on the right is working as it should. Any thoughts as to what could be causing the digital gauge to not display?

 

[GGuillot]

The digital gauge on my rxdi doesn’t work, no gas gauge level indication or info at all, screen is blank. But the speedo gauge on the right is working as it should. Any thoughts as to what could be causing the digital gauge to not display?

If you look at a wiring schematic in the SM, the info gauges need two 12 volt sources to activate or come on. You could take it off the ski and do this bench test. Or trace on the ski and verify both 12 volts is getting to the gauge. If the bench test doesn't work or you're getting 12 volts on both lines to the gauge on the ski and it's still not coming on, your other alternative is to open it up and clean it, or get another gauge.

Inside the gauge, sometimes corrosion gets on the large connector between the lcd display and main board, cleaning it with an electrical spray will sometimes work.

 

[JMarciniak]

I’m new to the Jetski world, how would I test the cables?

 

[etemplet]

If your speedo is working you are getting power. I restore a few skis and I've wasted money trying to get this system working. I generally don't mess with the gauges if they don't work. That said, you may be able to find an INFO gauge for $150.00 if you want to give that a shot (buy from reputable individuals). If you want to fix one this ought to get you started. LOL I just replaced the LED screen cover on the one pictured. Yikes what a pain. Good Luck.