• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

how to test oil injector

Status
Not open for further replies.

seadooer

New Member
Just purchased a 92 and 95 which have been sitting for about a year. once i charge the batteries and put some fresh gas in it, i'm gonna try to start them but how do i make sure the oil pump is working so i don't seize the engine within the first 30 seconds? Is there a way to test this? Also what looks to be an oil line is disconnected in both skis. This is the line that runs the length of the engine compartment and terminates in the rear with some other hoses. One of them has a tear in the line so i will have to replace it...does this line connect somewhere in the tank? any tips on a thorough once over on other things to check prior to starting them after sitting so long will be appreciated as well. thanks
 
You can remove your oil pump and keep the main line attached, hook the pump to a drill and spin it counter clockwise and you should see oil coming out where the lines go up the pump to the carbs.
 
Status
Not open for further replies.
Back
Top