How To Change Spark Plugs In 2007 Speedster 150 215hp

[قطري424]

HI ALL

every 1 keeps telling me u shoukd have spare plugs on boat ..ok, but i dont know where is thier place in the engine !!!

can any 1 post a pic and explain for me how to change them??

i know its easy but i didnt find them !

thanks

Fahad.

 

[kustomkarl]

Here is some info on changing the plugs;

4-tec plugs NGK brand, DCPR8E Gap/ 0.7-0.8 MM or .028-.031in.

To replace the plugs remove the Oil dipstick, remove the plastic cover over the engine, replace the dip stick. Unplug the wire from the spark plug coil ( it's part of the spark plug cap) wiggle and pull the cap/coil out of the spark hole. Be careful not to break it. Loosen the spark plug, insert the cap/coil in to grab the plug and remove it. Gap the new plug, remove the screw top on the top of the plug, insert it in the cap/coil push it in the plug hole. Use a socket to tighten it. Snug it up go about 1/4 turn, loosen and snug it up(this compress the seal ring on the bottom of the new spark plug). Put some grease on the coil cap where it meets the cylinder and insert on the plug. Connect the coil wire. Do one spark plug at a time. Replace the plastic cover.


Karl

 

[قطري424]

thanx alot Mr.Karl

is the grease necessary?

 

[kustomkarl]

It does 2 things...it lubes the cap going back on and it keeps out some water too. Just a little dab will do ya.

Karl

 

[قطري424]

thanx again

i really appreciate ur advices..

Fahad

 

[Squidoo]

I'm interested to know if your plugs actually needed to be changed. Will you take some pictures?

 

[sporsterjoel]

I'm interested to know if your plugs actually needed to be changed. Will you take some pictures?

I think he just whats to know incase he ever needed to do it...