How do I remove the coil from the plug

[jbacon]

Hi All:

Putting my new Speedster away for the first time, and want to fog the cylinders. However, I am not sure how to remove the coil from the plug. Looks to be a push on / off, but not sure if it would screw on somehow. Don't want to break something the first time out.

Thanks....... Jeff

 

[kustomkarl]

On the 4-tec you need to unclip th coil first than slight twist the cap so it comes out. Then use a spark plug socket to loosen up the spark plug and unthread it from the head. Next use the coil from the plug and slip it back over the loose spark plug and pull it out of the spark plug opening. Do the same for each spark plug, You could put a little grease on the cap on the outside of the cap for ease of removal next time, before you install it over the spark plug on installation. You can fog into the intake hose too if you wanted to.

Karl

 

[jbacon]

Removing Coil

Thanks Karl !!

Decided to Fog through the intake as well. Seems a lot easier

Jeff