bigJake
Well-Known Member
So I get the Santa Fe that I am selling inspected at one of the major chain stores (that sells tires and batteries but I don't want to bash them so I won't name them) last week. Mechanic shows me a microscopic "crack" in the edge of one of the rear brake pads and says they need replaced (for some ungodly amount of $) and a $1.49 license plate bulb needs replaced for ($16). I said I'll take the car home and replace the rear brake pads and lite bulb. At first the manager said he would have to charge me to reinspect the vehicle, but then agreed if I had it back within 2 days he wouldn't charge me again.
Take it back the next day, manager says 20 minutes. Mechanic puts it on the rack to verify the rear brake change. I'm kinda watching thru the window in the waiting room. First thing he does is removes the left front tire. I'm wondering, why did he remove the FRONT tire??? Then he removes the rear tires and checks out the new brakes. Then nothing for half hour....
Manager calls me out to show me the left front CV boot has a leak. A stream of fresh grease in one of the valleys of the accordion boot. MANAGER SAYS "it must have just happened because it wasn't leaking when we inspected it yesterday".
I'm thinking, hmmm quite a coincidence, but what can i say....
$300 to fix (he said they don't replace boots, they would replace the whole axle) BUT it's not required to pass inspection because it's not getting grease on the brake pads, yet.
I obviously don't tell them to fix it. Bring the car home and takes me a while to find a very small hole in the very top of the boot in the bottom of one of the accordion valleys.
So long story short, I did an internet search on what I could patch the hole with. Found one guy that said he successfully used Hondabond which I have never heard of and another guy suggested vulcanizing cement. Thoughts? Keep in mind I am selling the vehicle, so I don't want to replace the boot, but I also don't want to screw somebody over.
Take it back the next day, manager says 20 minutes. Mechanic puts it on the rack to verify the rear brake change. I'm kinda watching thru the window in the waiting room. First thing he does is removes the left front tire. I'm wondering, why did he remove the FRONT tire??? Then he removes the rear tires and checks out the new brakes. Then nothing for half hour....
Manager calls me out to show me the left front CV boot has a leak. A stream of fresh grease in one of the valleys of the accordion boot. MANAGER SAYS "it must have just happened because it wasn't leaking when we inspected it yesterday".
I'm thinking, hmmm quite a coincidence, but what can i say....
$300 to fix (he said they don't replace boots, they would replace the whole axle) BUT it's not required to pass inspection because it's not getting grease on the brake pads, yet.
I obviously don't tell them to fix it. Bring the car home and takes me a while to find a very small hole in the very top of the boot in the bottom of one of the accordion valleys.
So long story short, I did an internet search on what I could patch the hole with. Found one guy that said he successfully used Hondabond which I have never heard of and another guy suggested vulcanizing cement. Thoughts? Keep in mind I am selling the vehicle, so I don't want to replace the boot, but I also don't want to screw somebody over.