help with p0111 2004 rxp

[kbolaloco1]

hello all and thank you in advance for any input on my issue, i was riding at full open throttle when i felt the ski loosing power, I checked the cluster and the check engine was on, i pressed the set buttom 5 times and the p0111 code came in, that was the only one showing, i checked and it has to do with the manifold temperature, so i was wondering what mighht be going on, I was on a vacation where the ski stay with salt water for 3 days because i didnt have access to freash water to flush it, other than that my riding was the same as always, when i got home i checked the sensor connector and it looked fine, but anyways i cleaned it and im wating to try it to see if taht was the issue.any input will be really appreciated,

Thanks

 

[Duane72]

When you cleaned it what did it look like? Did it have white "crust" on it? The saltwater is terrible for PWCs unless they are meticulously flushed after every day in the water.

 

[kbolaloco1]

When you cleaned it what did it look like? Did it have white "crust" on it? The saltwater is terrible for PWCs unless they are meticulously flushed after every day in the water.

it wasnt that bad, didnt see anything white on it.. so hopefully that was the issue

 

[kbolaloco1]

any idea, anyone??

 

[Duane72]

it wasnt that bad, didnt see anything white on it.. so hopefully that was the issue

actually if it had white corrosion on it I would have said it was the salt. since it wasn't that bad, I'm not so sure. I don't think anyone will have any further inclination until you can get it out on the water and run it again to see if that took care of the issue.

 

[kbolaloco1]

i guess you are right... one thing i missed to say is that it only happened at wot so maybe that is something else i will let you guys know whats up when i ride it , Thanks

 

[kbolaloco1]

i actually rode it yesterday after cleaning the sensor and didnt happened again i guess that was it, thank you very much for your help

 

[Duane72]

i actually rode it yesterday after cleaning the sensor and didnt happened again i guess that was it, thank you very much for your help

No problem. I'm glad that was the issue! Keep an eye on it, but sounds like you are good to go.