blairwill4
Active Member
Theres like 20 or less of those hulls in the whole US that goess 100 plus and they all have rxp motors in them lol.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Florida Classifieds
- Thread starter nammer
- Start date
- Status
Spimothy Leary
Well-Known Member
100 eh ? ok.. sure...
that's a pretty tough nut to crack, although a surprisingly large number of gp hulls are quite capable of 80+, and some conversions 85-90, but it was dam difficult and expensive to cross the low 80's (a little easier now since people are getting quite good at modding the 4tech) 4-6 yrs ago they were quite popular hulls to mod up as gprxp and gpsho although lately the trend is to just mod up RXP hulls and avoid the extra work involved in the conversion.
that's a pretty tough nut to crack, although a surprisingly large number of gp hulls are quite capable of 80+, and some conversions 85-90, but it was dam difficult and expensive to cross the low 80's (a little easier now since people are getting quite good at modding the 4tech) 4-6 yrs ago they were quite popular hulls to mod up as gprxp and gpsho although lately the trend is to just mod up RXP hulls and avoid the extra work involved in the conversion.
nammer
Well-Known Member
nammer
Well-Known Member
n3k0de
Active Member
DAGRE147
New Member
http://columbusga.craigslist.org/boa/4650732997.html these yamaha jet boats bring a tidy profit if it's really "just the starter"...which is rarely is
http://atlanta.craigslist.org/wat/boa/4655249952.html
http://atlanta.craigslist.org/wat/boa/4655249952.html
Last edited by a moderator:
nammer
Well-Known Member
hmmm, is it?
DAGRE147
New Member
Last edited by a moderator:
Spimothy Leary
Well-Known Member
dam,,, some of those look pretty dam good
DAGRE147
New Member
Addiction - when you start mentally measuring the length and width of craigslist deals to calculate if they will fit in your garage with your other toys
I want that speedster [emoji7]
330xi
Active Member
I picked up the exact same ski with 50 more hours for $3000.. Jeez.
nammer
Well-Known Member
it's practically free!
I have that 95 Speedster in the backyard still. I made an offer on a house today. If they accept I'll be thinning.
Spimothy Leary
Well-Known Member
I sent that speedster lead to a couple of east coast guys... one was out of town the other was going to call.
curiously, did anybody call on that race ski ? now i'm wondering what it had under the seat.... I might call tomorrow and explore that. there have been a few conversions that pop up on GH now and then that are really killer deals... I just haven't bit on one.
curiously, did anybody call on that race ski ? now i'm wondering what it had under the seat.... I might call tomorrow and explore that. there have been a few conversions that pop up on GH now and then that are really killer deals... I just haven't bit on one.
Race ski? What the? That must have been Nam's "I remember seeing this before"
When I clicked on it it was gone.
My house here is a great location but just a one bedroom. It's like staying at a cool little weekend cabin but three years later! haha
When I clicked on it it was gone.
My house here is a great location but just a one bedroom. It's like staying at a cool little weekend cabin but three years later! haha
Bnelson
New Member
[MENTION=51824]Matt Braley[/MENTION], it's that link posted by n3kOde.... When u click on the link now it only shows one picture... Yesterday when it was posted there were more pictures, it looked the hull was a carbon fiber upper... Was hoping you would chime in on it because it made me curious.
Naw man that's just a dead salt turd that somebody turned their kid loose with a paint brush on.
New house better have a huge detached shop and water access, if not retract the offer and keep looking.
Bnelson
New Member
Man I wish those pics would come back up, u could actually see the grain in the Carbon Fiber....
nammer
Well-Known Member
this one, $60 hull
Attachments
Bnelson
New Member
Yes thank you, [MENTION=51824]Matt Braley[/MENTION], this is what I was talking about...
I have seen a process where guys will spray paint through a mat similar to below to get the "carbon" look
- Status
Similar threads
- Locked
