• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Florida Classifieds

Status
Not open for further replies.
haha, no worries at all, just pm me your phone number and I'll let u make it up to me with unlimited tech support like I do with these other fine FL gentlemen



does it sound like we are having a seadoo meet in miami, I'll check my work schedule, looks like i'm free, what day and time are we meeting next week? if i recall correctly you are off tues right oscar?

Used to be :(
Now I ride in 4 hr blocks before going in at 1:30

I ride from 8/9-12pm. Takes me ~30mins to be at ramp.
 
Nothing, it looks like new and is super fast. It has the usual scrapes n thebottom but thats it.



Matt here are your specs




2001 RXX Model - Technical Specifications
Dimensions
Length 112.3 in. (285 cm)
Width 47.3 in. (120 cm)
Height 40 in. (101.6 cm)
Weight (dry) 623 lbs. (282.5 Kg)
Rider Capacity 1
Fuel Capacity (incl. reserve) 15.0 US Gallons (56.5L)
Oil Capacity 1.6 US Gallons (6L)
Storage Capacity 10.6 US Gallons (40.3L)
Engine
Type Two-stroke, Twin-cylinder
Rotax. R.A.V.E. exhaust
Bore x Stroke 88.04mm x 78.2mm
Displacement 951.2 cc
Compression ratio 6.1:1
Intake system Rimoldi Double Carbon
Fiber Reed Valves
Carburetion (2) Modified Mikuni
BN 46-42
Flame arrestors R&D Racing high-flow
flame arrestors
Exhaust Factory Pipe - Twin pipe, dry exhaust system with Modified Bombardier waterbox
Water by-pass UMI Billet
Lubrication Variable Rate Oil Injection
Cooling Water, open system
Fuel type Minimum 91 octane unleaded
Horsepower 160
Drive unit
Propulsion system Skat Trak Magnum water
jet pump
Jet pump Full stainless steel, axial
flow, single stage, 14 vane
Transmission Direct drive
Impeller Skat-Trak Stainless
Steel Swirl
Venturi/Nozzle Skat-Trak cast - adjustable
Drive shaft Skat-Trak
Hydraulic trim R&D Racing 2-position
lever activated
Electrical
Ignition Digital DC-CDI with modified timing curve
Starter Electric
Battery 12-volt
Rev limiter 8,000 RPM
Hull
Type Semi-V, fiberglass reinforced, trued and blueprinted
Color SeaDoo Racing Yellow/Black
Sponsons Beach House Express adjustable composite plate sponsons
Deck pads Jettrim
Spray deflector Jettrim
Seat cover Jettrim
Steering system UMI Billet Aluminum system
Handlebars UMI Racing
Handle Grips UMI soft rubber
Equipment
Tachometer STD, 90mm Analog
D.E.S.S. STD
 
hey, if you decide to make a trip to so fla, and i'm not busy, I'm down, I want to take advantage of oscar's hospitality AND ride his other skis!!!! :driving: might as well add another one :driving:
 
if all works out well, i'll own a 96 xp tonight (thanks in advance toro !)

now.. can somebody please talk me off the fence on a gp1300r ? i'm going to look at one, i'm i'm a little nervous, i'm afraid i might buy the dam thing...
 
hey, if you decide to make a trip to so fla, and i'm not busy, I'm down, I want to take advantage of oscar's hospitality AND ride his other skis!!!! :driving: might as well add another one :driving:


oh oh!
I am down to one and no double trailer!
I'm in the process of fabricating a new one out aluminum C channel but guy who was doing just called w/800 dollar price tag
:facepalm:

I said stop and I'll come down and talk.

Two 25' section is 150 so thats 650 more for bending and welding??????
 
oh oh!
I am down to one and no double trailer!
I'm in the process of fabricating a new one out aluminum C channel but guy who was doing just called w/800 dollar price tag
:facepalm:

I said stop and I'll come down and talk.

Two 25' section is 150 so thats 650 more for bending and welding??????

well ya better take care of that before matt and I come down :lol:, maybe we can pick up spim and el toro on the way, and of course whoever else, u like how I'm inviting everyone to ur place :)
 
Status
Not open for further replies.
Back
Top