fixing my 94 sea doo spi

[old school sea doos]

Hey so i just bought my 94 sea doo spi and had it for about 3 weeks before the stering nozzel brock right off.

the only thing that was left for sterring compartments was a long rod sticking out the back what do i need to fix this. ? i already bought the nozzel by the way and the long rod is threaded at the end

 

[octaneski]

The nozzle bolts to the back of the pump with 4 long bolts.
then steering tip bolts to that section with 2 10mm bolts.
The rod sticking out is your steering cable.
There's a piece that threads on it. Then the other end has a 10mm bolt that connects through the swivel to the steering nozzle.
Hope that makes sense.

 

[seadooya]

Hey so i just bought my 94 sea doo spi and had it for about 3 weeks before the stering nozzel brock right off.

the only thing that was left for sterring compartments was a long rod sticking out the back what do i need to fix this. ? i already bought the nozzel by the way and the long rod is threaded at the end

Go to any hardware store, and get a "heim" joint, that fits the thread of the steering rod. Then a nut/bolt long enough to go thru the heim and nozzle "arm" to connect the two.