First Oil Change O Rings Look Normal?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

BRuigrok

Member
First time doing an oil change i’ve heard the o rings stick out a touch but curious from some veteran experience if these o rings looks pinched or if this is normal

wasn’t sure if both act as a seal or if the top is just for dust

everything was oiled and torqued to spec might just be overthinking itIMG_6671.jpegIMG_6676.jpeg
 
Last edited:
Looks good and you are correct that the small one you see doesn't do much and have found them not there at all plenty of times and no leaks. Just make sure it doesn't leak which they do on occasion, especially the small one under the bolt.
 
Status
Not open for further replies.
Back
Top