Was taking the 2011 210 Wake for a last spin - was glass and it was humming. As we slowed down in an area to do wake boarding alarms went nuts. Shut down immediately to suss the situation - temp light (Starboard) and engine light (Port) were on. Turned key back on to see what it all was and alarms started going again so opened the engine room. Tones of steam. smoke but cleared quick. See in the back the intercooler hose had popped off and fluid everywhere. Limped back to the dock on Port after 10 min's. after 30 mins the temp light was still on but no alarms. Waited for an hour and temp sensor went off, got some coolant and put it in (probably should have left it longer now that I think but....). Anyway it is at home and have to put the correct coolant in as used the aluminum stuff from NAPPA.
Is there anything I should be looking for or do before redoing it and taking it for a test - hope I haven't cooked it but not even sure how to know?
Is there anything I should be looking for or do before redoing it and taking it for a test - hope I haven't cooked it but not even sure how to know?