Hi all,
Making a cable for the diagnostic port between the Deutsch connector inside and originally an obd2 cable, cutting off the obd2 end and patching to a db9 connector does this look correct:
Thanks
Making a cable for the diagnostic port between the Deutsch connector inside and originally an obd2 cable, cutting off the obd2 end and patching to a db9 connector does this look correct:
| Deutsch Pin | Deutsch Color | Signal | DB9 Pin | DB9 Cable Color |
|---|---|---|---|---|
| A | White | CAN-H | 7 | Purple |
| B | Blue | CAN-L | 2 | Green |
| E | Green | Ground | 6 | Yellow |
| C | Red | +12V (Ignition) | 9 | Red (optional) |
Thanks
