Challenger 1800 Misc Parts Question

[JustD00It]

In the winter I was winterizing my boat and a few small plastic pieces broke off due to the cold (I guess) and its a nuisance because I like to keep my boat looking nice. Here are pictures of the pieces that broke:

Anybody know where I cold get these parts? Do I have to replace the whole glovebox or just get a small hinge for it?

Sorry if this is a stupid question.

 

[Seadoobuddy]

My nephew broke off his glove box lock tab, I just looked over the different sites that sold them and bought a new lock....try the link on top of this page or Parkeryamaha. They might have the hinge too, who knows.

 

[Spimothy Leary]

the round latch can be purchased on ebay, reasonable, don't order from seadoo, its almost cheaper to buy a new boat !
its the southco m1 latch
http://cgi.ebay.com/ws/eBayISAPI.dl...1&ssPageName=ADME:L:OC:US:1123#ht_2126wt_1015
double check your hole dimensions but that should be the one i'm going from memory but I think its a 2" hole.
(edit) i'm having issues with ebay links today, the item # is 250903636381 if you put the item # in the search bar you'll get the listing, its the same vendor that I bought my 3 latches from...

I paid $19 + 6 shipping and bought 3 of them, cooler, back hatch, storage locker. all for like $65 shipped.
stainless is available as well.

probably not necessary, but i remember reading its the same latch that chrysler uses on their mini vans as well.

on the hinge, somebody might chime in... i'm sure its out there, actually my buddy has the 1800 and he used a piece of nylon strapping from an old trailer winch and a rivet gun on his, and it works fine, you really never see the hinge itself unless the bin is open.

 

[parrothd]

269700031 HINGE 4.49 4.49
SubTotal
4.49

 

[JustD00It]

the round latch can be purchased on ebay, reasonable, don't order from seadoo, its almost cheaper to buy a new boat !
its the southco m1 latch
http://cgi.ebay.com/ws/eBayISAPI.dl...1&ssPageName=ADME:L:OC:US:1123#ht_2126wt_1015
double check your hole dimensions but that should be the one i'm going from memory but I think its a 2" hole.
(edit) i'm having issues with ebay links today, the item # is 250903636381 if you put the item # in the search bar you'll get the listing, its the same vendor that I bought my 3 latches from...

I paid $19 + 6 shipping and bought 3 of them, cooler, back hatch, storage locker. all for like $65 shipped.
stainless is available as well.

probably not necessary, but i remember reading its the same latch that chrysler uses on their mini vans as well.

on the hinge, somebody might chime in... i'm sure its out there, actually my buddy has the 1800 and he used a piece of nylon strapping from an old trailer winch and a rivet gun on his, and it works fine, you really never see the hinge itself unless the bin is open.

Thanks! I do recall them being used in Chrysler vans because a relative has one. They are used for pulling the seats up.

 

[JustD00It]

269700031 HINGE 4.49 4.49
SubTotal
4.49

Thank you for your help. Is this surely the hinge for the glovebox/bin?

 

[parrothd]

http://partsfinder.onlinemicrofiche.com/dooware/showmodel.asp?Type=13&make=seadoojb&A=23&B=21

part 36...

ARGH!!! Click HULL - CENTRAL COVER W/ ENGINE COVER

 

[JustD00It]

http://fiche.worldofpowersports.com/wps/showmodel.asp?Type=13&make=seadoojb&A=23&B=21

part 36...

ARGH!!! Click HULL - CENTRAL COVER W/ ENGINE COVER

Thanks. I found it. :cheers:

 

[JustD00It]

the round latch can be purchased on ebay, reasonable, don't order from seadoo, its almost cheaper to buy a new boat !
its the southco m1 latch
http://cgi.ebay.com/ws/eBayISAPI.dl...1&ssPageName=ADME:L:OC:US:1123#ht_2126wt_1015
double check your hole dimensions but that should be the one i'm going from memory but I think its a 2" hole.
(edit) i'm having issues with ebay links today, the item # is 250903636381 if you put the item # in the search bar you'll get the listing, its the same vendor that I bought my 3 latches from...

I paid $19 + 6 shipping and bought 3 of them, cooler, back hatch, storage locker. all for like $65 shipped.
stainless is available as well.

probably not necessary, but i remember reading its the same latch that chrysler uses on their mini vans as well.

on the hinge, somebody might chime in... i'm sure its out there, actually my buddy has the 1800 and he used a piece of nylon strapping from an old trailer winch and a rivet gun on his, and it works fine, you really never see the hinge itself unless the bin is open.

Would http://www.ebay.com/itm/260558328156#ht_732wt_286 work? It says for 2" opening and its cheaper plus it locks. ( If link doesn't work use 260558328156 )

Thanks for your help.

 

[koby6587]

cool good talk! Im guessing mine is the same with a 2000 sea doo challenger 2000 the ski slot on floor im missing it. i wasnt going to ask but now i wish i did earlier! let me us know if the locking one works!(sounds good to me)

 

[JustD00It]

cool good talk! Im guessing mine is the same with a 2000 sea doo challenger 2000 the ski slot on floor im missing it. i wasnt going to ask but now i wish i did earlier! let me us know if the locking one works!(sounds good to me)

I'll let you know. I'm hoping to buy it today so I can get it in the next 2 weeks. Shipping time is between Fri. Apr. 13 and Fri. Apr. 20.

 

[Spimothy Leary]

Would http://www.ebay.com/itm/260558328156#ht_732wt_286 work? It says for 2" opening and its cheaper plus it locks. ( If link doesn't work use 260558328156 )

Thanks for your help.

maybe, i'm not 100%, did you measure your opening to be sure ?
I only suggested the item because I bought it, it was shipped fast & fair, and it fit perfectly and took all of 1 minute to install.
i saw the locking one and passed on it (too easy to lose the dam key then your new key becomes a flathead screwdriver)
i actually debated for a couple of days on getting stainless but decided it would stick out like a turd in a punchbowl.