Brprxt215
Active Member
So mid June I bought a 96 xp for $400. I did some “tune up” maintenance on it such as redoing tempo fuel lines with marine grade ones. Pulled both Raves and cleaned them and had my Welch plug on the exhaust welded up. Finally got to actually try and ride it today. It doesn’t have much low end power and no top end power with bogging in the mid to upper range. Only getting 44mph out of it(on my girlfriends dream o meter riding next to me) it has aftermarket K&N flame arrestors on it. Does this effect the specs of the jetting? I am going to pull the carbs and rebuild them with mikuni kits but not sure how I should set the jets with the flame arrestors. Any help would be appreciated! Thanks guys!