• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Can you identify this Seadoo impeller?

Status
Not open for further replies.

JCT

Member
I pull this out of a 1999 GTX LTD that I bought used. The model number is not on any seadoo list that I can find. There is no seadoo badge on it. C3956D44-15FB-49A1-AE28-96919834B925.jpeg
 

Attachments

  • 65DBD524-E09A-4099-B7C6-197797DB214B.jpeg
    65DBD524-E09A-4099-B7C6-197797DB214B.jpeg
    177.2 KB · Views: 46
  • B45CC468-E181-4239-A13E-E8FB3211BDA3.jpeg
    B45CC468-E181-4239-A13E-E8FB3211BDA3.jpeg
    175.3 KB · Views: 43
  • 73BAB8A7-1AA5-4337-B268-257A067288AF.jpeg
    73BAB8A7-1AA5-4337-B268-257A067288AF.jpeg
    176.2 KB · Views: 39
  • 48FDE5F7-3072-4634-8D12-D380206243EB.jpeg
    48FDE5F7-3072-4634-8D12-D380206243EB.jpeg
    184.1 KB · Views: 43
Agree with you on the piss part, lol!
The parts manual says 1998 gtx ltd is 271000932? I found a list of seadoo impeller parts numbers for boats and pwc and 907 was nowhere to be found. I ask because I was either going to send this one back to be rebuilt or buy a new one.
Thanks!
 
Seadoo impeller numbers are all over the place and typically don't match the book numbers.
Minnetonka4me has probably seen more of them than anyone so trust his opinion.

Send it off to Impros and give them your model it's going into and it will be correct and good as new.
 
Thanks to both of you, I will send it in.

I thought maybe it was aftermarket and didn’t know if it was worth getting fixed...
 
Definitely a Seadoo OEM number. As long as you tell Impros what it’s going on they will make it happen.

Also Minnetonka sells good ones too so you can reach out to him also.
 
on the 951s, my fav prop is the Solas Concord 15/20 if I recall correctly.
Seems to run better than OEM and, was less $ if I recall.

Literally the only "mod" to the 951 I endorse.
 
Thank you all for the great advice, sent my impeller to Impros. Looks like new!
 

Attachments

  • 286956CC-9FCF-4041-817B-F4A20105EB06.jpeg
    286956CC-9FCF-4041-817B-F4A20105EB06.jpeg
    164.5 KB · Views: 17
  • 888AFDB5-801F-4D32-AB5C-885CB790F1BD.jpeg
    888AFDB5-801F-4D32-AB5C-885CB790F1BD.jpeg
    174.7 KB · Views: 16
  • 5751F5A8-E322-416D-B6B2-671ECF2FFDF8.jpeg
    5751F5A8-E322-416D-B6B2-671ECF2FFDF8.jpeg
    163.8 KB · Views: 16
  • A1EC045C-E7BF-4CD2-9D91-B7ABF152963A.jpeg
    A1EC045C-E7BF-4CD2-9D91-B7ABF152963A.jpeg
    184.8 KB · Views: 17
Mine was pretty bad so it needed the “Worx” which cost me $135 plus shipping. I am happy with it, looks new.
I also sent in my GSX impeller that only needed basic repair for $85. It also looks new.

OEM SeaDoo 907 impeller. Weld necessary damage, and outside diameter. Machine to correct size. 'Power-Tune' service, check pitch, rec finish, balance impeller
 
That looks so nice and shiny. Makes me want to send mine in even though it's in good shape :D.

What was the turn around time like on it?
 
I was told usual turnaround is two weeks. This is busy season, I sent in two and got them back in a month which is fine with me.
 
Status
Not open for further replies.
Back
Top