Can someone send me a picture of the wiring

[Blawrence608]

of a battery to battery switch wire connections? My teenage daughter accidentally took it apart for our dual battery project before I was outside and now none of the switches are working by the steering wheel. I suspect we are missing a connection somewhere. The motors starts fine after the new switch and batteries. Just looking to get things like the bilge pump, horn or engine vent fan working again

specifically looking for a 2003 challenger 2000 240EFI example, but at this point I will take what I can get.

thank you,
Brian

 

[Tim75]

If you don't find an orphan wire by your new switch or near the battery, have you checked the fuses in the fuse block in helm box?

 

[Blawrence608]

they all look fine, I see a bunch of red but not connected to anything wires coiled and strapped out fo the way but my daughter didn't wire strap them out of the way and they couldn't reach the switch or battery as they are in the very rear of the boat on the right hand side. I guess I will just tone out wires and find the whats not connected.... still appreciate a picture if possible. Thanks for the reply!

 

[gazzaskirepair]

gary_garnett
As at
Y a h o o

 

[tupperwolf]

Gary, do you happen to have wiring diagrams for a 2000 Islandia?

 

[gazzaskirepair]

Send me an email and I’ll send what I have

 

[gazzaskirepair]

It’s two pages

 

[tupperwolf]

Thank you!!! Much appreciated!

 

[gazzaskirepair]

No problem
I need to find some one with a Speedster 200 to check the back of the RPM gauge to tell me what the Adj setting is pointing to

 

[gazzaskirepair]

Picture added

 

[Blawrence608]

found it cut and re crimped the end of the fuse box and reattached. All things working like they should be thank you!!