• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Blower popped a fuse, not sure why

Status
Not open for further replies.

1320INC

New Member
Bought this bought today and the blower didn't work. I found the 7.5 amp fuse blown in the fusebox and put in a 10 just to see if the blower worked. I hit the switch and it almost seemed like it wasn't gonna run, then it kicked on and looked like some debris flew out of the vent. It ran for about 3-5 seconds, then blew the 10amp fuse. Any ideas?? I am wondering if the fan is sticking and needs lubed or if the fan is just bad? I looked at all the wiring I could see and everything looked normal, like its NOT a short, but who knows.
 
Junk?

Sounds like the fan was jammed by what ever flew out.
Clear the fan and replace the fuse.
Was it paper or foam, Maybe a wasp nest.
 
Sounds like the fan was jammed by what ever flew out.
Clear the fan and replace the fuse.
Was it paper or foam, Maybe a wasp nest.

You should play the lottery my friend!! I took it off today and inspected it and WALLAH, a big ole wasps nest in there!! She works beautifully now!!:cheers:
 
Status
Not open for further replies.
Back
Top