Almost done, couple ????

[super1c]

Thanks to all for the help with my posts. Put them on the hose today and after a couple crank cycles they fired right up. Now to my questions. 1) does anyone now at how may gallons left you have to change to reserve. I changed all lines, filters, checked gas valve and such. But on the second one it ran for about a minute and had to change to reserve to get it to continue to run. I only put in 2 galons in a empty tank. Did the selector valve plug or is the tank low enough for reserve??? 2) The manual say's RPM at 3000 out of water and 1500 in. My question is how the $##@ do i know what my RPM's are when their is no RPM gauge. Or is mine just not working? I thought that was just a fuel gauge. Im from the sled world so not having a RPM gauge is odd to me. Thanks for any help, CCC

PS It's still 2 1995 GTX

 

[Dr Honda]

The actual RPM's are not critical... and it's useless to try to set the idle out of the water. If you think you need to adjust it... go to the lake, and put them in the water. I normally adjust it to the lowest stable idle. That's normally at 1500 rpm's.

Reserve... well, it's different on all the skis... but 2 gallons on an empty tank... I'd say you would need to be on reserve.