Hello, so I purchased my first 787 a few months ago and today while winterizing it I noticed the nylon cap for the oil to go into the counter balance. I took the cap off and put a wire in to see if there was any moisture but could barely tell if there was oil on the wire so I cut a 4” long by 1/4” wide piece of cardboard off of an old cereal box and stuck it down into the case as far as I could which was only about 3 inches. I only got about 1/8th of an inch of oil on the cardboard. The oil was pretty dark but wasn’t milky. The machine has 130 hours on it. I’ve read that there is supposed to be 1 oz. or 30ml of of oil in there. I’m worried that there’s not enough in there. Anybody know how much oil should show up when I dip it? 1/8 th of an inch doesn’t seem like much, but there’s no way for me to be sure I got the cardboard to the bottom of the case. It did bottom out, but not sure if it was hitting the exact bottom.