txhellraiser
New Member
Need some ideas on where to go here. Put a new MPEM in today and have been having issues since. Was getting 2 beeps and ski would turn over. Put everything back together and now I'm getting no beeps with lanyard installed. 1 beep when start button is pressed. If I disconnect power, with lanyard on, and power it back up I get 4 beeps immediately but still 1 beep once I try to start.
I've checked the DESS post and can hear holder relay kicking in when lanyard is attached. Verified holder relay is sending 12+ to the CDI. Front and rear boxes have good grounds. Nothing is corroded. Dash lights up when lanyard is attached.
I do have CanDoo Pro and can't get it to communicate with ski. I'm half way leaning to DESS post b/c of this issue but the holder relay is activating and power is going to CDI.
Any professional tips/help would be appreciated.
I've checked the DESS post and can hear holder relay kicking in when lanyard is attached. Verified holder relay is sending 12+ to the CDI. Front and rear boxes have good grounds. Nothing is corroded. Dash lights up when lanyard is attached.
I do have CanDoo Pro and can't get it to communicate with ski. I'm half way leaning to DESS post b/c of this issue but the holder relay is activating and power is going to CDI.
Any professional tips/help would be appreciated.
