• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

96 SPX No Spark Now

Status
Not open for further replies.

lee470

New Member
I just replaced the Charging coils and flywheel in my SPX. It started like a new one,till I took off. Went about 200 feet and it died. NO Spark to the plugs. Checked the fuses and all ok. Please dont tell me its the little black box. HELP, it driving me crazy:confused:
 
Could be anything. You have to do some trouble shooting.

Start pulling wires apart, and check the parts with a meter.

There is a chance that you didn't get a wire tucked down in the stator, and it rubbed on the flywheel.
 
That fixed it. I didnt tuck any wires in and the flywheel cut all 4. Got that fixed but now I cant turn the engine off unless I chock it or pull a plug wire,and that last one really hurts when your knee-deep in water. Any suggestions where to look next.
 
I just ran a continuity test on the mpem . When I conected the red wire and the black there was no reading, but when I reversed them I got a connection. Is the mpem bad?
 
Status
Not open for further replies.
Back
Top