C ckk81 New Member Yesterday at 9:39 AM #1 96 GTX 787 lower compression front cylinder, 130 (vs 145 rear). My real issue is the leakage show in the photo. Any immediate thoughts on a cause? Had the jugs bored to .25 over and used a wsm top end kit.
96 GTX 787 lower compression front cylinder, 130 (vs 145 rear). My real issue is the leakage show in the photo. Any immediate thoughts on a cause? Had the jugs bored to .25 over and used a wsm top end kit.
S Spider4real Active Member Yesterday at 1:52 PM #2 Looks like the oil might be blowing past the rave valve. I would check the bellow to make sure no holes and still attached properly.
Looks like the oil might be blowing past the rave valve. I would check the bellow to make sure no holes and still attached properly.
