95 xp800 micro touch settings help!!

[ajh2780]

Hi can someone please provide the setup instructions for the 95 800 micro touch limiter? cannot seem to find anywhere on the web? 96 800 all day but nothing for the 95's they are different.. thanks so much in advance!

 

[mandriva]

It,s same setting

 

[ajh2780]

need the pins layout and tinning settings shows placement of jumpers

 

[Matt Braley]

+2

The early ones for the "95 only" are specific to the CDI ending in 0810 but the settings charts are the same.

 

[ajh2780]

well my "block number is "0" which isn't on the chart I specifically remember it having diff pin placement I appreciate the help but without the actual instructions which I can locate. I've seen the 96 and 95 charts they are Diff the cdi were diff along with most th parts the 95's were hand built and had non mass produced parts

 

[ajh2780]

can't locate. stupid autocorrect

 

[mandriva]

Here

 

[Matt Braley]

Welcome to the forum ajh. We are the authority here on XP 800's and the differences between them and other X4's. I just say this because of the "hand built" line and you thinking I'm wrong with my aftermarket parts answer. I'm the guy that's holding those old MT modules and tons of other aftermarket goodies. Please feel free to ask more questions. I can also program a higher rev limit, more aggressive timing curve, and different initial timing settings in your stock grey box.

 

[ajh2780]

Here

thanks so much!