• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

95 XP project

I’ve had a couple black spots develop on the vinyl, not sure why. Also the colour was good but the sample I got from 1502 fabrics was even closer
 
I am going to try doing a 96 GTX seat. I hope it turns out as nice as yours did.
If you need advice let me know, the most important part is not working from one direction to the other when going around curves but starting out with the staples about 4 inches apart, bunching they vinyl and splitting the difference between staples with the next staple, good luck
 
It will be this Spring before I do it, but I will keep that in mind. I have read the post you have made already, so I have an idea what to do.
Thanks again.
 
I’m going to dust the cobwebs off my wallet and spring for some new foot pads for this 95 XP. I was going to go with Black Tip Wish Bone in purple. Best choice? Also wanted to ask if anyone has any experience with the flat stock? How is cutting it? I can save a bit of money buying the flat stock but I can’t see me cutting it as nicely as the packages.IMG_3941.png
 
Well to be totally honest Black Tip is nothing special. Having said that, SBT bought out HydroTurf and it’s the same garbage as Black Tip. So at this point pick your poison because it’s the same thing.
I would go pre-cut. Cutting it yourself isn’t worth the effort.

Also if your ski hat the factory mats attached with rivets make sure you plug the holes before installing new mats.
 
Well to be totally honest Black Tip is nothing special. Having said that, SBT bought out HydroTurf and it’s the same garbage as Black Tip. So at this point pick your poison because it’s the same thing.
I would go pre-cut. Cutting it yourself isn’t worth the effort.

Also if your ski hat the factory mats attached with rivets make sure you plug the holes before installing new mats.
Has the quality of hydro turf suffered since being bought out by SBT? I would like the best for this if there is a best. I only chose the black tip because of the wishbone pattern they have but grooved would be fine as well
 
Has the quality of hydro turf suffered since being bought out by SBT? I would like the best for this if there is a best. I only chose the black tip because of the wishbone pattern they have but grooved would be fine as well
Yes, HydroTurf is now harder and less grippy just like Black Tip. It’s definitely not the old high quality it used to be. They really just bought the name and all production is in China.
 
Yes, HydroTurf is now harder and less grippy just like Black Tip. It’s definitely not the old high quality it used to be. They really just bought the name and all production is in China.
Well, I guess it’s Black Tip then, uuugh. That’s disappointing. Thanks Miki
 
Back
Top