95 speedster exghaust help

[canamspyder1]

i just bought a 95 speedster and i noticed alot of water in the beilge. I opened the engine compartment when it was running and notice both motors on the tuned pipe just above where the outlet of the tuned pipe goes to the rest of the muffler there is a hole spitting water out while running. Now i found that odd but figured its suppose to be there because both motors have this in the same spot. There is other hose on top that are hooked up i couldnt find anything that wasnt hooked up. im assumeing this is a tell tail but shouldnt it be plumbed out-side the boat? please help i cant find that hole in the servive manual and i dont want to plug it until i know for-sure what it is.

 

[Dr Honda]

Post a pic if you can.

 

[canamspyder1]

thanks i pulled one of the tuned pipes off and found out it is a corrision hole.
gonna weld it up

 

[Dr Honda]

Well... that would do it.

It's common for the pugs to corrode, but from your description... I was thinking it was down by the rubber coupler.

 

[roneagan@cfl.rr.com]

While it's off get them all done! Found all mine were suspect, if one is leaking the others are close too.. I cut all mine out and made new aluminum plugs for all four..