Jakeo625
Member
So here's my issue is rebuilt the carbs with osd back to oem followed the rebuild thread to a t. They specify to resue old spring no big deal. Did leak check and all tests pass except pop off. My issues is the spring which I determined by swapping faulty spring and low pressure followed. The oem spec is 16-21 psi for the 94 Xp I'm at 23 psi on one carb and 12 on the other. The spring is about as rare as unicorn horns part number 270500242 the lowest spring 65lb mikuni with my 1.5 needle and seat would give me 30ish pounds on pop off what do I do? Am I just completely screwed or what I have way to much invested in this jetski to let a $3 spring be the end please help
Last edited:
