93 seadoo gtx

[mikelaughlin1]

what should the idle be at out of the water(rpm)does anyone know thanks

 

[kustomkarl]

Yes, the idle on the hose should be about 3000 rpm's as it doesn't have any load on the impeller. In the water with water load on the impeller it should be about 1500rpm's.

Karl

 

[mikelaughlin1]

thanks for the help

 

[kustomkarl]

If you need any more information, let us know...

Karl

 

[mikelaughlin1]

well took my seadoo out for the first time 3 days ago worked great for about 20 minuts the hitting small waves started acting like starving for fuel so at full throttle it spit and sputtered worked good then it did it again did this 3 or 4 times then stalled 2 times then wouldnt start it tried to. if i feathered the throttle. but no start. it has good spark dry plug. so i choked it made it worse so towed it back in went home it spit water out the exaust now starts runs out of water but sometimes have to feather the throttle to start it. any help would be appreacieted. already rebuilt carbs compression at 150 and 155 fuel filter clean selector valve clean and i am fustrated because i want to play!!!!!SO PLEASE IF YOU CAN HHEELLPP

--------------------------------------------------------------------------------

 

[kustomkarl]

If it's got fresh fuel and spark plugs, it might be the carbs are still dirty. When you cleaned them did you use carb cleaner to clean all the passages to? Sounds like dirty carbs.

Karl

 

[mikelaughlin1]

yes i cleaned them good and replaced all the fuel in the tank before i put it back together took it out 3 days later

 

[mikelaughlin1]

also still have grey fuel lines but cleaned them out before hooking them to carbs

 

[kustomkarl]

Well we found your problem...the gray fuel lines deteriorate from the inside out... You need to replace the gray fuel lines and re-clean the carbs.

Karl

 

[mikelaughlin1]

ok thats what i was planing to do at least i am on the right track thanks again for all the help let you know what happens

 

[kustomkarl]

We'll be here to help if you get in a jam.

Karl

 

[mikelaughlin1]

do you have to use a special fuel filter because of the 2 cycle

 

[mikelaughlin1]

or can i put a universal one

 

[timmyboy76]

should have the filter, looks like a white cylinder/water trap filter. Open hood up, remove the bin, and look inside there. You can remove it, and install universal one.

 

[mikelaughlin1]

Well changed the plugs filter and hoses set idle seems to run better off to the lake to test it and let you know thanks guys

 

[kustomkarl]

Cool let us know if its all set.

Karl