657x engine install questions

[gelsby]

I just got back my rebuilt 657x engine from FullBore and am about to install it in my 1995 GTX

The flywheel and rotary valve cover are on and were installed by FullBore

I am going to install as much as I can before taking it to the dealer so they can use the alignment tool to make sure my motor is properly shimmed and aligned with drive shaft.

My question is how much can I install before without impeding access to the engine mounts. I assume I can't install the exhaust but can I put the carbs back on? and hook up all my oil lines , electrical etc.

Any other tips? I was told to install the started before the engine support plate

FullBore gave me new gaskets for the install should I use gasket sealant on any of them if so what type and which gaskets ?

 

[mikidymac]

If you want you can install the oil lines and carbs. I would leave the pipe and air cleaner box off so they have room to add the shims.

The pipe and exhaust gaskets go on dry. The carb base gaskets you can use a little Gasgasinch or other sticky gasket dressing just to hold them in place. I wouldn't use any silicone or RTV on them though.