• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

4-tech upgrade kit to 300hp

Status
Not open for further replies.

shucky

Active Member
Just thought this may e of interest to some with the 4 techs they reckon it brings the 1500 cc up to the 300hp

This kit contains the following original Sea Doo OEM components

3 x Ignition Coils
3 x Coil Cap/Seal
3 x Coil connectors with pins and connector seals. (used to replace your original connectors)
3 x Coil Bolts
1 x Valve Cover
1 x Oil Fill Cap
1 x Oil Cap Pin
1 x Oil Cap Band
1 x Oil Pump Housing (replaces your original front oil pump housing with oil filter neck)
 
Not trying to pull others away from this forum but I have found all this on another forum. [MENTION=43374]Coastiejoe[/MENTION] check ya pm.

$426.95
PLEASE NOTE: These kits are currently on back order from Seadoo and will become available sporadically. There is not set ship date. If you want one of these kits please pre order now to reserve the next available kit. Once available and shipped to you we will notify you.

Upgrade your 4-Tec motor to the new style bolt in ignition coils used on the 2016 Sea Doo 300 HP watercraft. This kit contains the following all original Sea Doo OEM components

3 x Ignition Coils
3 x Coil Cap/Seal
3 x Coil connectors with pins and connector seals. (used to replace your original connectors)
3 x Coil Bolts
1 x Valve Cover
1 x Oil Fill Cap
1 x Oil Cap Pin
1 x Oil Cap Band
1 x Oil Pump Housing (replaces your original front oil pump housing with oil filter neck)
 
Last edited by a moderator:
No, it won't. All this kit is doing is changing the valve cover style and the oil filler location, plus adding the "bolt-in" style secured ignition coils to prevent them from popping out.

I wonder if the upgrade would come with any real performance without modifying the engine?
 
Status
Not open for further replies.
Back
Top