• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2015 SeaDoo Spark

Mrmustang197886

New Member
So I rebuilt the engine and it started and ran just fine and now nothing comings on like it is getting no power to anything and the screen will not come on. Any suggestions or help would be greatly appreciated
 
Start with checking fuses, load testing battery, and making sure electrical connections are good. Sometimes the relay in the fuse box goes bad and causes issue you are experiencing.
 
Start with checking fuses, load testing battery, and making sure electrical connections are good. Sometimes the relay in the fuse box goes bad and causes issue you are experiencing.
I did all but nothing works cause it’s acting like it’s not getting power buts a brand new battery and it was running so it doesn’t make sense to me
Start with checking fuses, load testing battery, and making sure electrical connections are good. Sometimes the relay in the fuse box goes bad and causes issue you are experiencing.
 
I did all but nothing works cause it’s acting like it’s not getting power buts a brand new battery and it was running so it doesn’t make sense to me
If the issue is power, check all connection starting at battery and follow cables downstream. Make sure your ground is good too.
 
Back
Top