• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2014 rxt260 codes P0107, P1502, P0122

Status
Not open for further replies.

Jglines603

Active Member
hey all, I've got a 2014 rxt 260 I picked up recently as a fixer upper. Has these 3 codes^, and only sometimes will start, and only idles for a few seconds at a time. Will not rev up.

First thing we noticed is the guage cluster was cracked and water logged , so we got a new cluster and married it to the ECU. Next we ran through all the wiring around the fuse box, and everything there looks okay. Next we replaced the throttle body. No changes. Still has these 3 codes. Anyone run into something similar? Were going to run through the service manual and do all the testing we can without replacing more parts but I figured I'd see if anyone else has had this issue and found the problem, thanks.
 
Status
Not open for further replies.
Back
Top