2014 GTI screen problem

[TKP030]

My sister-in-law tipped the jet ski a few days ago and everything works (starts, runs all the good stuff) but the screen won't turn on. I checked connections and all the fuses in the fuse box and everything looks fine but the screen. Anyone have this issue and know what's wrong?

 

[POPPS]

My initial guess,,,based on disassembling some 2 stroke gauges and 1 fortec ,is that water has gone inside the gauge,,,now it would seem unreasonable for water to affect the circuit board that quickly,,,however,,,since it is a 2014,,,the process may have already started…check for power to the gauges,,,the fuses rarely go when a gauge cluster goes.

 

[TKP030]

My initial guess,,,based on disassembling some 2 stroke gauges and 1 fortec ,is that water has gone inside the gauge,,,now it would seem unreasonable for water to affect the circuit board that quickly,,,however,,,since it is a 2014,,,the process may have already started…check for power to the gauges,,,the fuses rarely go when a gauge cluster goes.

That's what I'm thinking since everything works just not the screen. Was hoping there was some random out of the ordinary fuse or plug for it someone else found out.

 

[Milehighguy303]

Same thing happened to my 2007 GTI years ago with the kids’ friends… a new gauge was the solution. I think if the ski is upside down too long, water gets into the gauge somewhere, or thru the main plug connector, and damages it.

 

[xspook]

Do you see any condensation in the gauge?