Hi everyone,
New to the forum and new to SeaDoo watercraft, but not new to PWCs.
So I just purchased a 2012 RXT iS 260 and got my first run time with it this past weekend. The machine has 68 hrs on it and I bought it on a consignment sale from the original point of sale that knows the owner. Dropped it in the water Friday night and it ran flawless for the couple quick runs I made up/down the lake. Next day, I took it out and it was struggling to get on plane and didn't want to get up to full RPM. I did a few short runs over a couple hour period to see if would run better, but it continued to have surging issues. I managed to get up to full power/RPM a couple times through the day, but saw continued surging issues. No warning lights came on. Spark plugs checked and like new-no moisture or anything foul present with plugs or boots. Battery is charged. Oil is clean and shows no signs of any contamination so far.
I would appreciate any info or recommendations anyone can provide! The previous owner was meticulous with the machine, so I don't assume any damage. But I'm at a loss currently.
Thank you in advance!
John
New to the forum and new to SeaDoo watercraft, but not new to PWCs.
So I just purchased a 2012 RXT iS 260 and got my first run time with it this past weekend. The machine has 68 hrs on it and I bought it on a consignment sale from the original point of sale that knows the owner. Dropped it in the water Friday night and it ran flawless for the couple quick runs I made up/down the lake. Next day, I took it out and it was struggling to get on plane and didn't want to get up to full RPM. I did a few short runs over a couple hour period to see if would run better, but it continued to have surging issues. I managed to get up to full power/RPM a couple times through the day, but saw continued surging issues. No warning lights came on. Spark plugs checked and like new-no moisture or anything foul present with plugs or boots. Battery is charged. Oil is clean and shows no signs of any contamination so far.
I would appreciate any info or recommendations anyone can provide! The previous owner was meticulous with the machine, so I don't assume any damage. But I'm at a loss currently.
Thank you in advance!
John