2013 Sea-Doo RXT 260 IBR and Check engine light when put in forward.

[RXTbray260]

I have a 2013 Sea-Doo RXT 260 that is throwing a IBR Module Error light and seconds later is throwing a check engine light and going into Limp Home Mode when I put the ski into forward (5k rpm max and 32mph max). But when i turn the ski off and turn it back on, it goes back into neutral and acted like nothing happened until i put it back into forward (reverse working fine). I originally thought it was the battery so i bought a new one and it still had that issue. Rectifier is working fine (14.4v charging when running) and wear ring looks good. I did not have this issue until after riding it for a couple hours today. IBR is new and ski only has around 114 hours. otherwise it runs good, If anyone knows the issue please tell me.

 

[ski-d00]

Check ibr amp draw on BUDS and recalibrate. Check and clean IBR connections. Still sounds like IBR problem even though it's new. Was the IBR and the IBRMON married to the ECU when installed? Did it ever work properly when it was installed?

 

[RXTbray260]

Check ibr amp draw on BUDS and recalibrate. Check and clean IBR connections. Still sounds like IBR problem even though it's new. Was the IBR and the IBRMON married to the ECU when installed? Did it ever work properly when it was installed?

Yes i had my buddy do it. It worked perfectly when after he did it but i just started having this issue today. he replaced it about 2-3 months ago

 

[skiasylum]

The IBR connector and its wiring from 6 inches back from connector are prone to corrosion.