2011 GTX LTD iS 260 blows fuse for START/STOP button

[GTXLTD260]

Hi Guys, I have a problem with a 2011 GTX LTD iS 260, the 3amp fuse for the START/STOP button keeps blowing.
I dont have any electrical drawings or schematics to look what is actually powered from this circuit. Can anyone advise where I could possibly find a service manual or electrical schematics for this seadoo?

 

[GTXLTD260]

Hi Guys, I have a problem with a 2011 GTX LTD iS 260, the 3amp fuse for the START/STOP button keeps blowing.
I dont have any electrical drawings or schematics to look what is actually powered from this circuit. Can anyone advise where I could possibly find a service manual or electrical schematics for this seadoo?

After taking all the other fuses out one-by one, I have come to fuse nr.10 which is also 3Amps and is used for OTAS and SW./Interr

Does anyone know what is SW./Interr ??

 

[PhiddyPop]

Good afternoon. I am having a similar problem with my 2013. Have now blown the fuse 3 times. Have you had any luck finding root cause? Appreciate any insight you can pass on.

 

[skiasylum]

Start Stop Switch Interrupter

 

[PhiddyPop]

Skiasylum - was the sss interrupter causing the fuse to blow? Did replacing the switch solve the problem?

 

[skiasylum]

I was curious what the Sw / inter was so I found it in a electrical schematic in my service manual and thought I would relay what it was. It is in circuit with a couple of 3 amp fuses and the start stop switch. There are circuit tests in the manual above my pay grade but if I was blowing one of those 3 amp fuses I would suspect the start stop switch or its wiring.

 

[Digdog]

Does the fuse blow when you press the start switch ? Or does it blow right when you replace it?