larryb1963
New Member
my ski starts and runs fine. I noticed the tachometer does not show rpm . all functions on the gauge cluster work.the motor will restart with no issues. I think the MPEM thinks it's Not running but it is running good for about 20/30 seconds and shuts off . I see it does the exact same thing if the lanyard is connected and I don't start the motor after 20/30 seconds it times out . I clearly understand the time out with the motor NOT running to save the battery,but it also times out when it is running. I have looked over a schematic and think it's got to be an internal issue with the mpem being there is no relay or circuit shown for the lanyard time out .( shut down ) I also noticed that the start stop button will start the motor , but not stop it. the starter will grind. I have to pull lanyard to stop motor. (conclusion ) 1-no tachometer reading , 2-start stop button will not stop motor.