Shop Discount Sea-Doo Parts

1997 Seadoo Gsi worm screw locks up

eclipse5611

New Member
Messages
1
Water Crafts
1997 Seadoo Gsi
Hello all...Newbie here..Ok i have a 1997 Seadoo Gsi. I have a new vts motor and new worm screw and new trim arm that connects to the worm screw.. ok so if i plug the motor in it goes up and down directions no problem..but soon as i install it and say go up with the trim the worm scew seems to get stuck flush with the trim arm..and then wont go back down and the fuse pops ..its greased very well..all new parts..im considering buying the trim fix to see if it will by chance fix my problem..Just wanting to see some peoples ideas and comments.. Thanks
 

mikidymac

Moderator
Staff member
Moderator
Messages
14,048
Location
California
Water Crafts
2003 GTI
2001 XP
1996 XP
1996 HX
1991 Superjet
2001 Superjet
Sounds like the actual trim module in the housing is bad which is very common. You can't fix them just replace them with a good one. You can also search "The Trim Fix" on google as another option.
 

Users who viewed this discussion (Total:8)

SPONSORED LINKS

Usergroup

Administrator Moderator Premium Member
Top