1997 gsx oil problem

[brock1]

ok so i cant seem to pin point my problem here. I have a 1997 seadoo gsx 800 that has way to much oil in the cylonders. So much that when i roll it over it sprays a mist out of the one cylinder by the way it only does it on one of them. so my question is this. Can i cut out the oil injection and just premix the gas. I have gotton many rtesponses but no one gives a straight answer. I also have another question for ya if i pull the plugs and rollit over with the plugs in the wires i see no spark even touching it to metal is this normal because when i have the plugs in it smoke comes out the tailpipe but it wont fire up. someone help

 

[Dr Honda]

The oil is coming either from the rotary valve seal... or the center crank seals. Changing to pre-mix won't fix that problem, since you still need oil on the gears.

 

[brock1]

any way that i can track it dowen without pressurizing the system and is the no spark normal when the plugs are out

 

[Dr Honda]

The seals are internal of the engine. There is no way to check them, without removing them.

 

[brock1]

new question for ya guys if i cut out the oil injection and leave the hoses hooked up for the rotary valve will that eliminqate my problem with the oil coming into the cylinders and if so how do i do it