1996 seadoo spx adding mods

[Matt Braley]

One black is ground. The other plugs into the wire that gives the coil it's signal, that's how it counts revs. The purple goes inline anywhere on the purple wires, that's power when ignition is on.

 

[glsmohio]

One black is ground. The other plugs into the wire that gives the coil it's signal, that's how it counts revs. The purple goes inline anywhere on the purple wires, that's power when ignition is on.

thanks matt, your like a book that never ends!

 

[glsmohio]

Got it all hooked up last night. hope to get the pipe painted tonight so i can install friday

 

[glsmohio]

well got the pipe all in last night and wow that thing is tight! I just have to hook the hoses up and then make the bracket and i should be good to go. I cant wait to see this ski in the water!

 

[glsmohio]

well i got the ski up and running and this thing kicks a**. next question is what kinda rpms should i be getting on this set up?

thanks
Scott

 

[Matt Braley]

I would shoot for 7200ish. If your at 7300 or over I'd open the hs needles(the rear a little more then the front) and the water adjustment valve a little.

 

[glsmohio]

I would shoot for 7200ish. If your at 7300 or over I'd open the hs needles(the rear a little more then the front) and the water adjustment valve a little.

thanks matt, i hoping the lake will be nice tonight when i get home and i can do a little work on them.