1995 Seadoo XP Jet Pump

[thomas0202]

Hello, I have an old 95 XP with a stuck jet pump. I am trying to remove it from the ski but it will not come out. I have removed all the visible bolts the should hold it in place. What else should I try to get it out. Thanks

 

[Bills86e]

I went thru 12 crow-bars til I found one with the right hook. I also used an impact
gun on the threaded stud ends to break the electrolosis. The top usually has sealant
at the three thru-hull tubes. Try the loosening the bottom left & right of the pump
with CB. Bill

You also can make a tool as described in your manual.

 

[txporkchop]

I used a jack mounted to a 4x4. Wrapped a tow strap around the pump and jack. It's hard to break that sealant loose plus all the sealant that gets in the thru fitting.

 

[thomas0202]

Thanks for the replies. The only thing I have is a come along. Is there a way to take it out like that?

 

[greyrider]

i have seen pics of a guy who used a come along tied to a tree. just make sure the pump is supported in some way to prevent it from dropping to the ground once it lets go
bood luck

 

[kd.bell]

Do you need to remove the external pump to replce through hull seals bearings?? got leak Sucking air water leaking in ???

 

[Bills86e]

That old but great ski will need engine re-aligned before reinstalling the serviced pump, and drive seal bearing, ect. this will ensure components longest life.