1995 Sea Doo SP Gas Gauge Question

[richie6]

Just got a 95 Sea Doo SP without a gas gauge, but has a hood with an area to add a gauge...

Question is, can a gas gauge be added that will be functional? If so, what is needed (gauge, wire, etc). I'm fairly new to jet skis, so any help is greatly appreciated!

 

[LouDoo]

Honestly I'm not that familiar with your ski, check the fuel baffle, if it has a two wire connector, pink and black I believe, not too much trouble. You would need a gauge and some wire, [MENTION=41828]Minnetonka4me[/MENTION] can probably tell us more and he will also have the parts you will need. Oh, and if you have a fuel baffle with the gauge sending unit you will also need to replace the float with the newer molded type.

I thought your ski had a multi-gauge with an led indicator for fuel. Does it have a single gauge hood? What gauge(s) does it have now?

Lou

 

[richie6]

The SP is the lower model, I believe from researching the ski. I have a single gauge good, but no gauge installed. I one the other models such as XP have the fuel gauge installed. I will have to look at the fuel baffle to see if there is the wires as mentioned.

 

[Minnetonka4me]

Its fairly simple; you'll need a fuel pickup with the sender, a gauge, and a harness. Check the top of your oil tank, I am pretty sure they put the sender in there...that can be hooked to the gauge as well.

Then its how fancy you want to get....analog or LCD gauge...

I have everything in stock if you want to make it happen.

 

[richie6]

Is there a certain harness/ wire colors to look for? Would it be on the fuel tank, since looking to add a fuel gauge??

How much am I looking at for a fuel pickup with sender, harness and gauge?


Thanx for the info.

 

[Minnetonka4me]

somewhere in the $100 range give or take depending on which gauge and if you can live with one thats a little faded or want a minty mint gauge.

They did make optional accessory kits, but good luck finding that wiring. I would be putting together a custom harness setup for you based off an x-4 model harness.

 

[richie6]

Minnetonka4me, PM sent